Considering how many towels you want to hang and making the right decision on the size of your rail, will ultimately result in a clean, serene and clutter free bathroom space. The 43inch wide single towel bar can be shortened by easily removing the horizontal bar and cutting on site.
Features:
- Width is customizable on by removing the horizontal bar and cutting on site
- Can hold a full width bath sheet to air dry, or 2 single folded bath sheets
- Stainless Steel construction ensures durability, sturdy horizontal bar won’t sag under the weight of damp towels
- Easy to install
Fixing System: RIGID Loc Mounting System.
This product uses our patented RIGID Loc mounting system which is designed to ensure the bathroom accessory remains secure to its mounting and will not wobble loose.
Material: GRADE 304 Stainless Steel.
Stainless Steel has a natural resistance to corrosion and therefore does not require any protective coating which makes this material ideal for the bathroom environment. The shiny polished finish of Stainless Steel is often confused with a Chrome finish, however the two could not be more different. While Stainless Steel will not peel or flake, Chrome products on the other hand are susceptible to chipping and pitting due to the nature if a coated product.
Cleaning and Care:
To keep your product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive free. When cleaning wall surfaces around your bathroom accessories do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel product.
What’s in the box:
4678 Single Towel Bar
Fischer UX 6 Plastic Plugs (4 pieces)
Wall Screws (4 pieces)
3/32″ (2.5mm) Allen Key (1 piece)
Installation Instructions (1 piece)
Mounting Template
Tools needed (not supplied):
Drill & Drill bits
1/4″ (6mm) Diamond drill bit – if drilling through ceramic tiles
1/4″ (6mm) Masonry drill bit – if drilling into Masonry (Brick)
Measuring tape
PH2 Screwdriver
Pencil
Spirit level
Installation tip:
- Check for water pipes before deciding where to drill
- In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy
Cleaning & Care:  Stainless Steel finishes
It is important to regularly clean your Bathroom Butler products to keep them in pristine condition. Simply wipe it down with a warm damp cloth and then buff dry with a clean dry microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive-free.Â
When cleaning wall or counter surfaces around your product do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel. Take special care with all colour finishes.Â
DO NOT use the rough end of a kitchen sponge to clean your product.
DO NOT clean your product with any kind of ACID BASED CHEMICAL, TILE CLEANER, or detergents that contain CHLORINE. This may contaminate and damage the surface finish of the product.
Cleaning & Care:  Colour finishes
For products with colour finishes it is extremely important to clean them daily using only warm water and then dry off with a dry soft cloth.
DO NOT allow any residue to dry on the surface of your product such as toothpaste, shaving cream, liquid hygiene hand soaps, and any other bathroom products as these may damage the coating. Clean off immediately with water and dry with a soft cloth.
DO NOT use the rough end of a kitchen sponge to clean your product.
DO NOT bump or scratch with other objects. The colour finish is a coated surface, therefore it is possible to chip or scratch it by bumping with other hard objects which are not covered by the warranty.
DO NOT use any household or industrial detergents.
DO NOT clean your product with any kind of ACID BASED CHEMICAL, TILE CLEANER or detergents that contain CHLORINE. This may contaminate and damage the surface finish of the product.
DO NOT use any abrasive cleaning materials.
Manufacturers Warranty:
All components of Bathroom Butler® stainless steel bathroom accessories with RIGID Loc Mounting system, excluding the colour finishes, are guaranteed against any manufacturing defects for a period of 15 years from date of purchase, as printed on the sales docket, which must be provided as proof of purchase. This updated Guarantee only applies to bathroom accessories with RIGID Loc purchased after 1 January 2020, all bathroom accessories with RIGID Loc purchased prior to 1 January 2020 carry a 10-year Limited Guarantee. All other bathroom accessories without RIGID Loc mounting system carry a 5-year Limited Guarantee.
Colour Finishes: The surface finish of all colour components (including PVD and other coating methods) of Bathroom Butler® bathroom accessories are guaranteed against any manufacturing defects for a period of one year from the date of purchase.
Excluded from this warranty are damages resulting from force majeure (Acts of God), including, but not limited to, lightning and floods, fair wear and tear, misuse, wilful damage, negligence, repair of device without the approval of Bathroom Butler® or damage resulting from incorrect installation.
The manufacturer’s liability is limited to repair or replacement of bathroom accessories only. No claim for consequential damage and/or labour and/or transport will be entertained. Damages arising from misuse of the bathroom accessory will render the warranty invalid.
This warranty is only valid when the product has been purchased from an authorised reseller or country/territory distributor and is only valid within the geographical borders of the country/territory that it was originally purchased. This warranty only extends to the original purchaser of this product and is not transferable.