Paper Holder Type 2 + Flap (8503)
With its distinct square modern design, this stainless steel toilet roll holder is designed with a flap to hide your paper roll and aides in tearing the paper. The curved arm with a slight bend at the end, prevents the roll from sliding off. The sturdy arm is also slightly pivoted away from the wall, which not only makes it easier to replace your standard size toilet roll, but ensures that the arm will not swing back against the wall or tiles.
Size: 133mm (width) x 93mm (depth) x 126mm (height)
The buthroom Butler Difference
Every toilet needs toilet paper and therefore also a toilet paper holder. The ideal toilet paper holder should be within arm’s reach, securely mounted on the wall with the assurance that it will not loosen over time.
- Designed to fit all standard-size toilet paper rolls on a single arm.
- Open design that allows for easy roll changes
- Featuring a flap to prevent your toilet roll from slipping off when pulling on the toilet roll
- Stainless Steel construction ensures durability
- Easy to install
Fixing System: RIGID Loc Mounting System
This product uses our patented RIGID Loc mounting system which is designed to ensure the bathroom accessory remains secure to its mounting and will not rotate.
Material: GRADE 304 Stainless Steel
Stainless Steel has a natural resistance to corrosion and therefore does not require any protective coating which makes this material ideal for the bathroom environment. The shiny polished finish of Stainless Steel is often confused with a Chrome finish, however the two could not be more different. While Stainless Steel will not peel or flake, Chrome products on the other hand are susceptible to chipping and pitting due to the nature if a coated product.
Cleaning and Care:
To keep your product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive free. When cleaning wall surfaces around your bathroom accessories do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel product.
What’s in the box:
8503 Paper Holder
Fischer UX 6mm Plastic Plugs (2 pieces)
Wall Screws (2 pieces)
2.5mm Allen Key (1 piece)
Installation Instructions (1 piece)
Tools needed (not supplied):
Drill & Drill bits
6mm Diamond drill bit – if drilling through ceramic tiles
6mm Masonry drill bit – if drilling into Masonry (Brick)
- Check for water pipes before deciding where to drill
- In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy
Product Dimensions: 133mm (width) x 93mm (depth) x 126mm (height)
Material: GRADE 304 Stainless Steel
Warranty: 15 Year Limited Guarantee
Fixing / Mounting System: RIGID Loc with double screw wall fixing
Suitable to be installed: Masonry or Concrete surface (wall fixings supplied), Tiled surface (wall fixings supplied), Dry wall - mounting onto stud (wall fixings not supplied), Glass (using Bathroom Butler glass mountings - optional extra)
Cleaning and Care:
- Clean regularly with a warm damp cloth, and then buff dry with a clean dry cloth
- DO NOT use the rough end of a kitchen sponge to clean your bathroom accessory
- To remove any small blemishes or fine scratches, use a non-abrasive metal polish
- DO NOT clean your bathroom accessory with any kind of ACID BASED CHEMICAL, TILE CLEANER or detergents that contain Chlorine, as these may contaminate and damage the surface finish
All components of Bathroom Butler® stainless steel bathroom accessories with RIGID Loc Mounting system, excluding the colour finishes, are guaranteed against any manufacturing defects for a period of 15 years from date of purchase, as printed on the sales docket, which must be provided as proof of purchase. This updated Guarantee only applies to bathroom accessories with RIGID Loc purchased after 1 January 2020, all bathroom accessories with RIGID Loc purchased prior to 1 January 2020 carry a 10-year Limited Guarantee. All other bathroom accessories without RIGID Loc mounting system carry a 5-year Limited Guarantee.
Colour Finishes: All PVD coated and other colour finishes are guaranteed against any manufacturing defects for a period of one year from the date of purchase.
Excluded from this warranty are damages resulting from force majeure (Acts of God), including, but not limited to, lightning and floods, fair wear and tear, misuse, wilful damage, negligence, repair of device without the approval of Bathroom Butler® or damage resulting from incorrect installation.
The manufacturer’s liability is limited to repair or replacement of bathroom accessories only. No claim for consequential damage and/or labour and/or transport will be entertained. Damages arising from misuse of the bathroom accessory will render the warranty invalid.
This warranty is only valid when the product has been purchased from an authorised reseller or country/territory distributor and is only valid within the geographical borders of the country/territory that it was originally purchased. This warranty only extends to the original purchaser of this product and is not transferable.